 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Series AME40-MAZ 40 Watt | AC-DC Converter FEATURES: * * * * 4000VAC I/O isolation Medical Switching power modules for PCB mounting Operating temperature: -40 to +85C Universal Input: 90-260VAC, 47-440Hz, or 120-370VDC * * * * Energy star compliant RoHS compliant Low Ripple and Noise CE, cULus approvals Models Single output Model AME40-3.3SMAZ AME40-5SMAZ AME40-12SMAZ AME40-15SMAZ AME40-24SMAZ CB Input Voltage (VAC/Hz) 90-264/47-440 90-264/47-440 90-264/47-440 90-264/47-440 90-264/47-440 Input Voltage (VDC) 120-370 120-370 120-370 120-370 120-370 Output Voltage (V) 3.3 5 12 15 24 Output Current max (A) 8 8 3.33 2.66 1.66 Efficiency (%) 78 82 84 83 82 Models Dual output Model Input Voltage (VAC/Hz) Input Voltage (VDC) Output Voltage (V) Output Current max (A) Efficiency (%) AME40-5DMAZ 90-264/47-440 120-370 5 4 80 AME40-12DMAZ 90-264/47-440 120-370 12 1.66 85 AME40-15DMAZ 90-264/47-440 120-370 15 1.33 82 AME40-24DMAZ 90-260/47-440 120-370 24 0.835 77 NOTE: All specifications are measured at an ambient temperature of 25C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. Input Specifications Parameters Current Inrush current <2ms Leakage current External fuse Input dissipation Start-up time Conditions 115 VAC 230 VAC 115 VAC 230 VAC Recommended slow blow type No load; 115VAC No load; 264VAC Typical Maximum 1000 530 25 50 150 Units mA mA A A A A W ms 3.15 <0.5 <0.8 117 Output Specifications Parameters Voltage accuracy Line regulation Load regulation Cross regulation Maximum Capacitive load Transient response deviation Ripple & Noise* Hold-up time (min) Minimum Load Current Conditions (LL-HL) 0-100% load single 0-100% load dual 25% load - 1st out, 100% load - 2nd out Depending of the model 25% load Step 20MHz bandwidth 115VAC Typical 2 0.5 1 2 5 470-23 000 2 50 29 0 Maximum Units % % % % F % of Vout mV p-p ms % of Max *Ripple & Noise measured with 0.1F M/C and 1F E/C www.aimtec.com F 052e R7 Tel: +1 514 620 2722 1 of 3 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AME40-MAZ 40 Watt | AC-DC Converter Isolation Specifications Parameters Tested I/O voltage Input FG Output FG Isolation Resistance Conditions 3 sec 3 sec 3 sec Typical 4000 1500 1500 >1000 Maximum Units VAC VAC VAC M General Specifications Parameters Switching frequency Over current protection Over voltage protection Short circuit protection Short Circuit restart Operating temperature Maximum case temperature Storage temperature Temperature coefficient Cooling Humidity Case material Weight Dimensions (L X H X W) MTBF Conditions Auto recovery Typical 47 110 Zener diode clamp Hiccup mode, indefinite Auto recovery -40 - +85 -40 to +95 0.02 Free air convection Maximum 140 110 Units KHz % % o o With derating above 50C 100 C C o C % / oC % RH g Non condensing Plastic resin + Fiberglass (flammability to UL 94V-0) 300 3.56 x 2.48 x 1.18 inches 90.5 x 63 x 30 mm > 800 000 hrs (MIL-HDBK -217F, t=+25oC) 95 Environment Approval Test Parameters Wave form Acceleration amplitude Bump duration Converter operation Number of bumps Test mode Displacement Acceleration Converter operation Shock Vibration Conditions Half sine wave 5gn 30 ms Before and after test, body mounted (on chassis) 18 (3 in each direction for every axis) Sweep sine, 10-100Hz, speed 0.05Hz/s 1 mm 3g, 3 loops 30min one cycle, 3h total, every axis tested Before and after test, body mounted (on chassis) Safety Specifications Standards EMI - Conducted and radiated emission Medical Electrical Equipment Harmonic Current Emissions Voltage fluctuations and flicker Electrostatic Discharge Immunity RF, Electromagnetic Field Immunity Electrical Fast Transient/Burst Immunity Surge Immunity RF, Conducted Disturbance Immunity Power frequency Magnetic Field Immunity Voltage dips, Short Interruptions Immunity cULus, CE, CB EN55011, class B EN 60601-1, CSA-C22.2 No. 601.1-M90 IEC/EN 61000-3-2, (EN60555-2) IEC/EN 61000-3-3, (EN60555-3) IEC 61000-4-2 IEC 61000-4-3 IEC 61000-4-4 IEC 61000-4-5 IEC 61000-4-6 IEC 61000-4-8 IEC 61000-4-11 Safety Agency approvals Pin Out Specifications www.aimtec.com F 052e R7 Tel: +1 514 620 2722 2 of 3 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AME40-MAZ 40 Watt | AC-DC Converter Pin 1 2 3 4 5 Single AC Input (N) AC Input (L) +V Output -V Output N. C. Dual AC Input (N) AC Input (L) +V Output Common -V Output Dimensions 90.50 (3.56) 2 3 27.94 (1.10) 4 27.94 (1.10) 1 3.56 (0.14) 3.56 (0.14) 63.00 (2.48) 55.88 (2.20) Top View 5 3.56 (0.14) 3.56 (0.14) 4.60 (0.18) 81.30 (3.20) 4.60 (0.18) DIV: 10.00 (0.40) 5O 1.30 (O 0.05) Dimensions mm (inch) Case Tolerance 0.50 (0.02) Pin Diameter 1.30 0.05 (0.05 0.002) Pin Pitch Tolerance 0.35 (0.014) Derating 100 Output Power (%) 80 60 40 20 0 - 40 - 20 0 Free Air Convection 50 C Safe Operating Area 20 40 60 80 85 100 Ambient Temperature C NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified.5..Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 5. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. www.aimtec.com F 052e R7 Tel: +1 514 620 2722 3 of 3 10.00 (0.40) 1.30 (0.05) 30.00 (0.18) Side View Toll free: + 1 888 9 AIMTEC (924 6832) North America only |
Price & Availability of AME40-MAZ
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |